2.泵的結構Structure
2.1立式結構的CLLa系列產品可在底座上直接立式安裝。電機架上部安裝電機,下部與泵體或底座聯結 The CLLa serine Marine
Vertical Centrifugal Pump Call be direct vertical setup on the base.The higher part of the
bracket installed the motor,and the lower part link to the pump or the base 2.2泵軸采用磨擦副為硬質合金(或硬質合金對金屬陶瓷)的機械密封 The pump shaft seal use
machinery sealing with hard alloy to hard alloy grit (or hard alloy to cermet
grit).When the
media transferred contain relatively more silt 2.3本泵采用深溝軸承或角接球軸承 The pump adopt deep ditch
ball bearing or angle to contact to ball bearing 2.4傳動采用彈性柱銷聯軸器 Drive adopt elasticity post
coupler,and set a middle shaft coupling for conveniently dismantle. |