(2)起前檢查泵的轉向 Check the d i rection of ryeolution for
the pump when starting the motor (3)水泵運行時,應檢查各儀表讀數是否正常 when the pump is operatrng,eheck if the reading for
all instruments are abnormal (4)長期工作時應經常檢查吸入管路上的接頭、旋塞等的緊密性 when the operaton i s for a longer time (5)經常注意電動機的發熱及機減密封泄漏情況 Look for heating up motor and
the condition of mechaniool packing leakage.
9、泵的停車 Shutting down the pump:
(1)關閉電動機后 Suction valve and pressing-discharge
valve must be closed up after the motor being shutted down.
(2)短期停車無需特殊保養 when the pump is shutted
down for a short time,it will require no special maintenace;but if
shutting down for a long time,warer in the Pumpbody
should he discharged to dry,after empling water,the necessary corrosion-vesistant measures must be taken and then
reserve.once the abnormal condition iS found,check and remedy must be taken at once.
|
序號 N0. |
故 障 Troudle |
產生 原因 possible Cause |
消除方法 Eliminating Methods |
(1) |
泵不吸水 fovr pump failed |
a.泵體內沒有剩余水。 there is no excess b.泵吸入空氣.可能通 過吸入管的各接頭處吸入空氣 Suck in air.This
takes place possibly in the connectors of suction pipe |
a.向泵體內灌水 Fill-up pumpbody with water b.檢查吸入管各接頭處,消除漏氣 Check for
connectors of suction pipe and eliminate leaekage if required. |